#49

Hi! Congrats on your script!
Any ideas where i should look into to adapt it to 64 grid?
Cheers!

1 Like
#50

Thanks!

I think the script should work with a 64 grid without any modifications. The script queries the grid for its size and sizes the board accordingly. I only have a 128 grid so I could never test it with any other sizes.

#51

I just simulated a 64 by setting my grid size to 8 x 8 and it seems to work. As Zellen doesn’t make heavy use of the varibright feature, I think you should be fine with a 64.

#52

I raised SCALE_LENGTH to 32 and tried to simulate a 256 by adding 8 to the Y coordinates and it seems to work – at least for my makeshift lower half of a 256.

I pushed the change to the GitHub master and uploaded release v1.3.3.

Hm, I can’t seem to edit my original post. Could some admin unlock it, so I can add the new release? @dan_derks maybe?

1 Like
#53

Confirmed - no more errors on 256 :+1: :tada:

Curious tho - I had to remove and re-clone the repo to get the changes. (had originally installed from maiden project manager)

1 Like
#54

Awesome! Great that it works now!

Re: maiden project manager: To be honest I haven’t dealt with it so far. Do I need to do something for a new version to appear in it? As far as I can see it links to the github repo but not to a specific version.

#55

You shouldn’t need to do anything other that push changes to the master branch on GitHub. Installing / updating just pulls the master branch of the referenced repository.

#56

Thanks @ngwese!

I just deleted my git installed Zellen and installed it with the project manager. I got the most recent version, so everything seems to be working for me. Maybe it was a caching issue @okyeron?

#57

yeah - not sure what was happening there. Some sorta cache, but not obviously the browser cache (which I had cleared).

@ngwese I’ll keep an eye out for if that happens again and report back.

1 Like
#58

is there a way to define the higher and lower note or octaves’ area?

1 Like
#59

Currently there’s no way to do this, but that’s a great idea! I’ll see if I can implement something like this.

1 Like
#60

Accidental zellen shoe-gaze and I am digging it. Zellen > crow > rings/plaits > clouds > AUM

4 Likes
#61

Lovely sounds! Some MBV/Slowdive-esque vocals would indeed be a perfect fit for this. :blush:

1 Like
#62

is there a way to vary the note length/time/gate?

1 Like
#63

Loving the script!
Just wondering if we have JF support yet?
And if it would be possible to have JF and crow cv operate simultaneously?

1 Like
#64

Thanks! Working on JF support right now, should be ready some time later today. Yes, Crow CV and JF simultaneously will be possible.

2 Likes
#65

Currently that’s not possible, sorry.

I’ve added it to the list of possible enhancements/ideas that I collect under the “Issues” tab on github: https://github.com/sarweiler/zellen/issues

1 Like
#66

Thank you :)…

1 Like
#67

I just released Version 1.4.0 (and 1.4.1 directly after that) with JF support to GitHub. Update via the maiden project manager, git pull, or download here.

For JF I added the same possibilities as for Crow’s CV2 (previously named “alternative CV”). The method for note calculation, a note offset, and an octave offset can be configured in the parameters menu. JF note output is off by default, so you will have to activate it in the parameters menu. You may have to change the setting for the ii pullup, depending on your configuration (default is on).

7 Likes
#68

Sad news.

2 Likes